Skip to main content

Updating Virtual Mobile Gateway

This page explains the procedure for updating a Virtual Mobile Gateway resource using the OCX Portal.

Preparation​

Please confirm the following before updating a Virtual Mobile Gateway resource:

  1. Your User Role is either admin or user.
  2. The status of the Virtual Mobile Gateway resource to be updated is activated.

Procedure for Updating a Virtual Mobile Gateway​

  1. Log in to the OCX Portal.
  2. Click [Access Lines] from the left navigation bar.
  3. When the [Access Lines] sub-menu appears, click [Virtual Mobile Gateways (VMGs)].
  4. Once the Virtual Mobile Gateways page is displayed, click the Edit icon in the Actions column on the right side of the resource you wish to update.
  5. The screen will switch to the configuration update steps. The following items can be modified. After completing the input for the items you wish to change, click [Update].
    • Virtual Mobile Gateway

      • Name

        • Enter an arbitrary name. A recognizable name makes management easier.
        • Maximum length is 40 characters.
        • Leading and trailing whitespaces are automatically removed.

      • Maximum SIM Registration Limit

        • Select the maximum number of SIMs that can be registered to the Virtual Mobile Gateway from the drop-down menu.
        • If you are reducing the limit, the number of SIMs currently linked to the Virtual Mobile Gateway must be within the new limit.
        Maximum SIM Registration Limit
        100 SIMs
        1,000 SIMs
        10,000 SIMs

      • Local ASN

        • Enter the AS Number to be used by the Virtual Mobile Gateway. 4-byte ASNs are supported.

      • Remote ASN

        • Enter the AS Number used by the destination OCX-Router(v1). 4-byte ASNs are supported.
    • Instance 1 / Instance 2
      • Local Address
        • Enter the IPv4 address for the instance in CIDR (IPv4/mask) format. (e.g., 169.254.0.1/30)
      • Remote Address
        • Enter the IPv4 address for the destination OCX-Router(v1). (e.g., 169.254.0.2)
      • MD5 Authentication Key
        • This is an optional parameter. If left blank, MD5 authentication will not be performed.
        • For MD5 authentication, you can set an alphanumeric string (A-Z, a-z, 0-9) between 6 and 80 characters.
  6. A confirmation pop-up will appear. If there are no issues with the details, click [Update].
  7. The details panel will be displayed at the bottom of the screen. Confirm that the changes are reflected. Note: You can update the status by clicking [Refresh] in the upper right corner.

This completes the update of the Virtual Mobile Gateway resource.